{"title":"T2-86 Core Barrel Drill Bits","description":"\u003cspan\u003eOur T2-86 Coring Drill Bits are designed to the highest specifications. They are Robust, durable and suitable to tackle any formation. With our full range of Falcon Standard and Hawk Set to Liner conventional bits, no rock formation is out of bounds. Build to fit a T2 barrel, these bits have a outer diameter of 86mm (3.4 Inches) and an inner coring dimeter of 72mm (2.8 Inches), making them ideal for consistently solid exploration samples.\u003c\/span\u003e","products":[{"product_id":"t2-86-impreg-core-bit-series-4","title":"Falcon 4 - T2-86 Impregnated Core Bit - Standard","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003c\/span\u003e\u003cb\u003eFalcon 4 Series\u003c\/b\u003e\u003cspan\u003e. The Falcon 4 is forged with the \u003c\/span\u003e\u003cstrong\u003ediamond slightly exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, meaning this series of Coring Bit is \u003c\/span\u003ebest suited \u003cspan data-mce-fragment=\"1\"\u003eto tackle\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003every\u003c\/strong\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003esoft to soft rock formations\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e such as\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eSand, Clay, Chalk, Salt\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003eand\u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eSoft Limestone\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrill-Its\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eFalcon\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e set of drill bits are our range of \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003estandard conventional coring tools\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e, meaning it they use \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCore Barrel Drill-Line Inner Tube Plastic Liner\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e consisting of a clear, thin-wall extruded rigid plastic tube of which by accurate manufacturing processes is manufactured to close tolerances on both the outside and the inside diameters. Clearance between the O.D. of the “Drill-Line'' and I.D. of the Core Barrel inner tube is therefore carefully controlled and allows easy fitting of the Plastic Tube into the inner tube in the field. When the clear plastic material is used (inserted) it will not contaminate the Core sample during drilling and encapsulation. The material does not absorb water and will not swell or change shape.\u003c\/span\u003e\u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":44918695690486,"sku":"T286STD004","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreBitSeries4STDFront.jpg?v=1697033708"},{"product_id":"t2-86-impreg-core-bit-series-7","title":"Falcon 7 - T2-86 Impregnated Core Bit -Standard","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003c\/span\u003e\u003cb\u003eFalcon 7 Series\u003c\/b\u003e\u003cspan\u003e. The Falcon 7 bits are designed with the \u003c\/span\u003e\u003cstrong\u003ediamond grade partially exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, making them best suitable to tackle\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esoft to medium soft rock formations\u003c\/strong\u003e\u003cspan\u003e such as\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eSand, Loose Sandstone, Shale, Salt \u003c\/b\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cstrong\u003eMedium Limestone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrill-Its\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eFalcon\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e set of drill bits are our range of \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003estandard conventional coring tools\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e, meaning it they use \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCore Barrel Drill-Line Inner Tube Plastic Liner\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e consisting of a clear, thin-wall extruded rigid plastic tube of which by accurate manufacturing processes is manufactured to close tolerances on both the outside and the inside diameters. Clearance between the O.D. of the “Drill-Line'' and I.D. of the Core Barrel inner tube is therefore carefully controlled and allows easy fitting of the Plastic Tube into the inner tube in the field. When the clear plastic material is used (inserted) it will not contaminate the Core sample during drilling and encapsulation. The material does not absorb water and will not swell or change shape.\u003c\/span\u003e\u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":44918697394422,"sku":"T286STD007","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T286CoreBitSeries7ImpregBacktoFrontWithLogo.jpg?v=1697023014"},{"product_id":"t2-86-impreg-core-bit-series-8","title":"Falcon 6 - T2-86 Impregnated Core Bit - Standard","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003c\/span\u003e\u003cb\u003eFalcon 6 Series\u003c\/b\u003e\u003cspan\u003e. The Falcon 6 is forged with the \u003c\/span\u003e\u003cstrong\u003ediamond very exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, meaning this series of Coring Bit is \u003c\/span\u003ebest suited to tackle\u003cstrong\u003e soft to medium rock formations\u003c\/strong\u003e such as \u003cb\u003eSand, Shale, Salt \u003c\/b\u003eand\u003cb\u003e Medium Limestone.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrill-Its\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eFalcon\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e set of drill bits are our range of \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003estandard conventional coring tools\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e, meaning it they use \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCore Barrel Drill-Line Inner Tube Plastic Liner\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e consisting of a clear, thin-wall extruded rigid plastic tube of which by accurate manufacturing processes is manufactured to close tolerances on both the outside and the inside diameters. Clearance between the O.D. of the “Drill-Line'' and I.D. of the Core Barrel inner tube is therefore carefully controlled and allows easy fitting of the Plastic Tube into the inner tube in the field. When the clear plastic material is used (inserted) it will not contaminate the Core sample during drilling and encapsulation. The material does not absorb water and will not swell or change shape.\u003c\/span\u003e\u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":44918697754870,"sku":"T286STD006","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreSeries6FrontWithLogo.jpg?v=1697024363"},{"product_id":"t2-86-impreg-core-bit-series-9","title":"Falcon 8 - T2-86 Impregnated Core Bit - Standard","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003cb\u003eFalcon 8 Series\u003c\/b\u003e. The Falcon 8 is forged with the \u003cstrong\u003ediamond very exposed\u003c\/strong\u003e from the bit matrix, meaning this series of Coring Bit is \u003cstrong\u003ebuilt for medium to medium hard formations\u003c\/strong\u003e, making it more effective for drilling through rocks such as \u003cstrong\u003eSandy Limestone, Sandy Shale, Claystone and Limestone.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDrill-Its\u003cstrong data-mce-fragment=\"1\"\u003e Falcon\u003c\/strong\u003e set of drill bits are our range of \u003cstrong data-mce-fragment=\"1\"\u003estandard conventional coring tools\u003c\/strong\u003e, meaning it they use \u003cstrong data-mce-fragment=\"1\"\u003eCore Barrel Drill-Line Inner Tube Plastic Liner\u003c\/strong\u003e consisting of a clear, thin-wall extruded rigid plastic tube of which by accurate manufacturing processes is manufactured to close tolerances on both the outside and the inside diameters. Clearance between the O.D. of the “Drill-Line'' and I.D. of the Core Barrel inner tube is therefore carefully controlled and allows easy fitting of the Plastic Tube into the inner tube in the field. When the clear plastic material is used (inserted) it will not contaminate the Core sample during drilling and encapsulation. The material does not absorb water and will not swell or change shape.\u003c\/span\u003e\u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":44918700179702,"sku":"T286STD008","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreBit-Series9Front.jpg?v=1697034478"},{"product_id":"t2-86-impreg-core-bit-series-12","title":"Falcon 12 - T2-86 Impregnated Core Bit - Standard","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis bit is part of the\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003eFalcon 12 Series\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e. The Falcon 12 is forged with the\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003ediamond very exposed\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003efrom the bit matrix, meaning this series of Coring Bit is\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003ebuilt for hard formations\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e, making it more effective for drilling through rocks such as hard\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003elimestone, dolomite, andesite, marble and magnetite.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrill-Its\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eFalcon\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e set of drill bits are our range of \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003estandard conventional coring tools\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e, meaning it they use \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCore Barrel Drill-Line Inner Tube Plastic Liner\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e consisting of a clear, thin-wall extruded rigid plastic tube of which by accurate manufacturing processes is manufactured to close tolerances on both the outside and the inside diameters. Clearance between the O.D. of the “Drill-Line'' and I.D. of the Core Barrel inner tube is therefore carefully controlled and allows easy fitting of the Plastic Tube into the inner tube in the field. When the clear plastic material is used (inserted) it will not contaminate the Core sample during drilling and encapsulation. The material does not absorb water and will not swell or change shape.\u003c\/span\u003e\u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":44942487912694,"sku":"T286STD012","price":151.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreBitSeries12Front.jpg?v=1697035586"},{"product_id":"t6-86-core-drill-bit-series-9","title":"Falcon 9 - T2-86 Impregnated Core Bit - Standard","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003c\/span\u003e\u003cb\u003eFalcon 9 Series\u003c\/b\u003e\u003cspan\u003e. The Falcon 9 is forged with the \u003c\/span\u003e\u003cstrong\u003ediamond very exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, meaning this series of Coring Bit is \u003c\/span\u003e\u003cstrong\u003ebuilt for medium hard to hard formations\u003c\/strong\u003e\u003cspan\u003e, making it more effective for drilling through rocks such as hard \u003c\/span\u003e\u003cstrong\u003elimestone, dolomite, andesite and magnetite.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrill-Its\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eFalcon\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e set of drill bits are our range of \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003estandard conventional coring tools\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e, meaning it they use \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCore Barrel Drill-Line Inner Tube Plastic Liner\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e consisting of a clear, thin-wall extruded rigid plastic tube of which by accurate manufacturing processes is manufactured to close tolerances on both the outside and the inside diameters. Clearance between the O.D. of the “Drill-Line'' and I.D. of the Core Barrel inner tube is therefore carefully controlled and allows easy fitting of the Plastic Tube into the inner tube in the field. When the clear plastic material is used (inserted) it will not contaminate the Core sample during drilling and encapsulation. The material does not absorb water and will not swell or change shape.\u003c\/span\u003e\u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":44954140737782,"sku":"T286STD009","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86CoreBitImpregSeries9Front.jpg?v=1697036544"},{"product_id":"falcon-10-t2-86-impregnated-core-bit-standard","title":"Falcon 10 - T2-86 Impregnated Core Bit - Standard","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003c\/span\u003e\u003cb\u003eFalcon 10 Series\u003c\/b\u003e\u003cspan\u003e. The Falcon 10 is forged with the \u003c\/span\u003e\u003cstrong\u003ediamond very exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, meaning this series of Coring Bit is \u003c\/span\u003e\u003cstrong\u003ebuilt for hard formations\u003c\/strong\u003e\u003cspan\u003e, making it more effective for drilling through rocks such as hard \u003c\/span\u003e\u003cstrong\u003elimestone, dolomite, andesite and magnetite.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDrill-Its \u003cstrong\u003eFalcon\u003c\/strong\u003e set of drill bits are our range of \u003cstrong\u003estandard conventional coring tools\u003c\/strong\u003e, meaning it they use \u003cstrong\u003eCore Barrel Drill-Line Inner Tube Plastic Liner\u003c\/strong\u003e consisting of a clear, thin-wall extruded rigid plastic tube of which by accurate manufacturing processes is manufactured to close tolerances on both the outside and the inside diameters. Clearance between the O.D. of the “Drill-Line'' and I.D. of the Core Barrel inner tube is therefore carefully controlled and allows easy fitting of the Plastic Tube into the inner tube in the field. When the clear plastic material is used (inserted) it will not contaminate the Core sample during drilling and encapsulation. The material does not absorb water and will not swell or change shape.\u003c\/span\u003e\u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":44980678557942,"sku":"T286STD010","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86CoreBitImpregSeries10FrontWithLogo.jpg?v=1697023541"},{"product_id":"t2-86-impreg-core-bit-series-2","title":"Falcon 2 - T2-86 Impregnated Core Bit - Standard","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003c\/span\u003e\u003cb\u003eFalcon 2 Series\u003c\/b\u003e\u003cspan\u003e. The Falcon 2 is forged with the \u003c\/span\u003e\u003cstrong\u003ediamond embedded\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003ein the bit matrix, meaning this series of Coring Bit is \u003c\/span\u003e\u003cstrong\u003ebuilt for vey soft formations\u003c\/strong\u003e\u003cspan\u003e, making it more effective for drilling through rocks such as hard \u003c\/span\u003e\u003cb\u003eClay, Soft Shale, Chalk, Soft Limestone \u003c\/b\u003e\u003cspan\u003eand\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eVolcanic Tuff.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrill-Its\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eFalcon\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e set of drill bits are our range of \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003estandard conventional coring tools\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e, meaning it they use \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCore Barrel Drill-Line Inner Tube Plastic Liner\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e consisting of a clear, thin-wall extruded rigid plastic tube of which by accurate manufacturing processes is manufactured to close tolerances on both the outside and the inside diameters. Clearance between the O.D. of the “Drill-Line'' and I.D. of the Core Barrel inner tube is therefore carefully controlled and allows easy fitting of the Plastic Tube into the inner tube in the field. When the clear plastic material is used (inserted) it will not contaminate the Core sample during drilling and encapsulation. The material does not absorb water and will not swell or change shape.\u003c\/span\u003e\u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":44994098921718,"sku":"T286STD002","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreBitSeries2Front.jpg?v=1697026000"},{"product_id":"t2-86-impreg-core-bit-series-14","title":"Falcon 14 - T2-86 Impregnated Core Bit - Standard","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is \u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e wide and produces an\u003cstrong data-mce-fragment=\"1\"\u003e inner core  of 72mm (2.8 Inches) in dimeter. \u003c\/strong\u003eThey are suitable for medium to hard geology. The T2 core barrels have a relatively \u003cstrong\u003esmall cutting area\u003c\/strong\u003e and therefore permit\u003cstrong\u003e rapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis bit is part of the\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003eFalcon 14 Series\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e. The Falcon 14 is forged with the\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003ediamond extremely exposed\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003efrom the bit matrix, meaning this series of Coring Bit is\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003ebuilt for very hard formations\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e, making it more effective for drilling through rocks such as hard \u003cb\u003eGneiss. Granite, Basalt, Gabbro \u003c\/b\u003eand\u003cb\u003e Rhyolite.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDrill-Its\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eFalcon\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eset of drill bits are our range of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estandard conventional coring tools\u003c\/strong\u003e, meaning it they use\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCore Barrel Drill-Line Inner Tube Plastic Liner\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econsisting of a clear, thin-wall extruded rigid plastic tube of which by accurate manufacturing processes is manufactured to close tolerances on both the outside and the inside diameters. Clearance between the O.D. of the “Drill-Line'' and I.D. of the Core Barrel inner tube is therefore carefully controlled and allows easy fitting of the Plastic Tube into the inner tube in the field. When the clear plastic material is used (inserted) it will not contaminate the Core sample during drilling and encapsulation. The material does not absorb water and will not swell or change shape.\u003c\/span\u003e\u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":44994099577078,"sku":"T286STD014","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreBitSeries14Front.jpg?v=1697035879"},{"product_id":"hawk-2-t2-86-impregnated-core-bit-set-to-liner","title":"Hawk 2 - T2-86 Impregnated Core Bit - Set to Liner","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003cstrong\u003eHawk\u003c\/strong\u003e\u003c\/span\u003e\u003cb\u003e 2 Series\u003c\/b\u003e\u003cspan\u003e. The Hawk 2 is forged with the \u003c\/span\u003e\u003cstrong\u003ediamond embedded\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003ein the bit matrix, meaning this series of Coring Bit is \u003c\/span\u003e\u003cstrong\u003ebuilt for vey soft formations\u003c\/strong\u003e\u003cspan\u003e, making it more effective for drilling through rocks such as hard \u003c\/span\u003e\u003cb\u003eClay, Soft Shale, Chalk, Soft Limestone \u003c\/b\u003e\u003cspan\u003eand\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eVolcanic Tuff.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof coring drill bits are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSet To Liner models\u003c\/strong\u003e, meaning the casing string that does not extend to the top of the wellbore, but instead is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanchored or suspended from inside the bottom of the previous casing string\u003c\/strong\u003e. There is no difference between the casing joints themselves. \u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":45000555888886,"sku":"T286STL002","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreDrillbitSeries2Front.jpg?v=1697025892"},{"product_id":"hawk-4-t2-86-impregnated-core-bit-set-to-liner","title":"Hawk 4 - T2-86 Impregnated Core Bit - Set to Liner","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003c\/span\u003e\u003cstrong\u003eHawk\u003c\/strong\u003e\u003cb\u003e 4 Series\u003c\/b\u003e\u003cspan\u003e. The Hawk 4 bits are designed with the \u003c\/span\u003e\u003cstrong\u003ediamond grade slightly exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, making them best suitable to tackle\u003c\/span\u003e\u003cspan\u003e \u003cstrong\u003eMedium Soft\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e to Medium rock formations\u003c\/strong\u003e\u003cspan\u003e such as\u003c\/span\u003e\u003cspan\u003e \u003cstrong\u003eSandy Shale\u003c\/strong\u003e\u003c\/span\u003e\u003cb\u003e, Claystone, Sandy Limestone, Siltstone \u003c\/b\u003e\u003cspan\u003eand\u003c\/span\u003e\u003cb\u003e Salt\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof coring drill bits are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSet To Liner models\u003c\/strong\u003e, meaning the casing string that does not extend to the top of the wellbore, but instead is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanchored or suspended from inside the bottom of the previous casing string\u003c\/strong\u003e. There is no difference between the casing joints themselves. \u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":45000559100150,"sku":"T286STL004","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreDrillbitSeries4Front.jpg?v=1697034087"},{"product_id":"hawk-6-t2-86-impregnated-core-bit-set-to-liner","title":"Hawk 6 - T2-86 Impregnated Core Bit - Set to Liner","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is \u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e wide and produces an\u003cstrong data-mce-fragment=\"1\"\u003e inner core  of 72mm (2.8 Inches) in dimeter. \u003c\/strong\u003eThey are suitable for medium to hard geology. The T2 core barrels have a relatively \u003cstrong\u003esmall cutting area\u003c\/strong\u003e and therefore permit\u003cstrong\u003e rapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003c\/span\u003e\u003cstrong\u003eHawk\u003c\/strong\u003e\u003cb\u003e 6 Series\u003c\/b\u003e\u003cspan\u003e. The Hawk 6 bits are designed with the \u003c\/span\u003e\u003cstrong\u003ediamond grade partially exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, making them best suitable to tackle\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esoft and some medium soft rock formations\u003c\/strong\u003e\u003cspan\u003e such as\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eClay, Chalk, Soft Limestone, Salt Loose Sandstone \u003c\/b\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cstrong\u003eMedium Limestone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof coring drill bits are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSet To Liner models\u003c\/strong\u003e, meaning the casing string that does not extend to the top of the wellbore, but instead is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanchored or suspended from inside the bottom of the previous casing string\u003c\/strong\u003e. There is no difference between the casing joints themselves. \u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":45000561656054,"sku":"T286STL006","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreSeries6FrontWithHawkLogo.jpg?v=1697025346"},{"product_id":"hawk-7-t2-86-impregnated-core-bit-set-to-liner","title":"Hawk 7 - T2-86 Impregnated Core Bit - Set to Liner","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is \u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e wide and produces an\u003cstrong data-mce-fragment=\"1\"\u003e inner core  of 72mm (2.8 Inches) in dimeter. \u003c\/strong\u003eThey are suitable for medium to hard geology. The T2 core barrels have a relatively \u003cstrong\u003esmall cutting area\u003c\/strong\u003e and therefore permit\u003cstrong\u003e rapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003c\/span\u003e\u003cstrong\u003eHawk\u003c\/strong\u003e\u003cb\u003e 7 Series\u003c\/b\u003e\u003cspan\u003e. The Hawk 7 bits are designed with the \u003c\/span\u003e\u003cstrong\u003ediamond grade partially exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, making them best suitable to tackle\u003c\/span\u003e\u003cstrong\u003e medium rock formations\u003c\/strong\u003e\u003cspan\u003e such as\u003c\/span\u003e\u003cspan\u003e \u003cstrong\u003eSoft Sandstone, Sandy Shale, Claystone, Limestone \u003c\/strong\u003eand\u003cstrong\u003e Siltstone\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof coring drill bits are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSet To Liner models\u003c\/strong\u003e, meaning the casing string that does not extend to the top of the wellbore, but instead is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanchored or suspended from inside the bottom of the previous casing string\u003c\/strong\u003e. There is no difference between the casing joints themselves. \u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":45000576401654,"sku":"T286STL007","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T286CoreBitSeries7ImpregBacktoFrontWithHawkLogo.jpg?v=1697023100"},{"product_id":"hawk-8-t2-86-impregnated-core-bit-set-to-liner","title":"Hawk 8 - T2-86 Impregnated Core Bit - Set to Liner","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003cstrong\u003eHawk\u003c\/strong\u003e\u003cb\u003e 8 Series\u003c\/b\u003e. The Hawk 8 is forged with the \u003cstrong\u003ediamond very exposed\u003c\/strong\u003e from the bit matrix, meaning this series of Coring Bit is \u003cstrong\u003ebuilt for medium to medium hard formations\u003c\/strong\u003e, making it more effective for drilling through rocks such as \u003cstrong\u003eSandy Limestone, Sandy Shale, Claystone and Limestone.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof coring drill bits are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSet To Liner models\u003c\/strong\u003e, meaning the casing string that does not extend to the top of the wellbore, but instead is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanchored or suspended from inside the bottom of the previous casing string\u003c\/strong\u003e. There is no difference between the casing joints themselves. \u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":45000582037750,"sku":"T286STL008","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86CoreBitSeries8FrontWithLogo.jpg?v=1688483736"},{"product_id":"hawk-8-t2-86-impregnated-core-bit-set-to-liner-1","title":"Hawk 9 - T2-86 Impregnated Core Bit - Set to Liner","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk\u003c\/strong\u003e\u003cb\u003e 9 Series\u003c\/b\u003e\u003cspan\u003e. The Hawk 9 bits are designed with the \u003c\/span\u003e\u003cstrong\u003ediamond grade very exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, making them best suitable to tackle\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMedium Hard\u003c\/strong\u003e\u003cb\u003e and some Hard soft rock formations\u003c\/b\u003e\u003cspan\u003e such as\u003c\/span\u003e\u003cspan\u003e \u003cstrong\u003eSoft Sandstone\u003c\/strong\u003e\u003c\/span\u003e\u003cb\u003e, Sandy Shale, Claystone, Limestone and Hard Shales. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof coring drill bits are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSet To Liner models\u003c\/strong\u003e, meaning the casing string that does not extend to the top of the wellbore, but instead is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanchored or suspended from inside the bottom of the previous casing string\u003c\/strong\u003e. There is no difference between the casing joints themselves. \u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":45000608743670,"sku":"T286STL009","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86CoreBitImpregSeries9FrontWithHawkLogo.jpg?v=1697035190"},{"product_id":"hawk-10-t2-86-impregnated-core-bit-set-to-liner","title":"Hawk 10 - T2-86 Impregnated Core Bit - Set to Liner","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bit is part of the \u003cstrong\u003eHawk\u003c\/strong\u003e\u003c\/span\u003e\u003cb\u003e 10 Series\u003c\/b\u003e\u003cspan\u003e. The Hawk 10 is forged with the \u003c\/span\u003e\u003cstrong\u003ediamond very exposed\u003c\/strong\u003e\u003cspan\u003e from the bit matrix, meaning this series of Coring Bit is \u003c\/span\u003e\u003cstrong\u003ebuilt for hard formations\u003c\/strong\u003e\u003cspan\u003e, making it more effective for drilling through rocks such as hard \u003c\/span\u003e\u003cstrong\u003elimestone, dolomite, andesite and magnetite.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof coring drill bits are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSet To Liner models\u003c\/strong\u003e, meaning the casing string that does not extend to the top of the wellbore, but instead is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanchored or suspended from inside the bottom of the previous casing string\u003c\/strong\u003e. There is no difference between the casing joints themselves. \u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":45000615559414,"sku":"T286STL010","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86CoreBitImpregSeries10FrontWithHawkLogo.jpg?v=1697023664"},{"product_id":"hawk-12-t2-86-impregnated-core-bit-set-to-liner","title":"Hawk 12 - T2-86 Impregnated Core Bit - Set to Liner","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis bit is part of the\u003cspan\u003e \u003cstrong\u003eHawk\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cb\u003e 12 Series\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e. The Hawk 12 is forged with the\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003ediamond very exposed\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003efrom the bit matrix, meaning this series of Coring Bit is\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003ebuilt for hard formations\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e, making it more effective for drilling through rocks such as hard\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003elimestone, dolomite, andesite, marble and magnetite.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof coring drill bits are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSet To Liner models\u003c\/strong\u003e, meaning the casing string that does not extend to the top of the wellbore, but instead is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanchored or suspended from inside the bottom of the previous casing string\u003c\/strong\u003e. There is no difference between the casing joints themselves. \u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":45000622702838,"sku":"T286STL012","price":151.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreBitSeries12FrontWithFalconLogo.jpg?v=1697035990"},{"product_id":"hawk-14-t2-86-impregnated-core-bit-set-to-liner","title":"Hawk 14 - T2-86 Impregnated Core Bit - Set to Liner","description":"\u003cp\u003e\u003cspan\u003eConventional coring \u003c\/span\u003e\u003cspan\u003eis a traditional method of taking samples from bottom-hole formations. This method is still the \u003cstrong\u003emost commonly practiced method\u003c\/strong\u003e in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for \u003cstrong\u003ehigh penetration rate and a longer life for the bit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eT2-86\u003c\/strong\u003e is built for a \u003cstrong\u003eT2 Core barrel.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe T2-86 is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e86mm\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003e(\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.3 Inches)\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e wide \u003c\/span\u003eand produces\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ean\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einner core  of 72mm (2.8 Inches) in dimeter.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThey are\u003cspan\u003e \u003c\/span\u003esuitable for medium to hard geology. The T2 core barrels have a relatively\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmall cutting area\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand therefore permit\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003erapid penetration\u003c\/strong\u003e, especially in harder rock formations. The thin wall barrels and core bits produce fewer cuttings which permits the use of lower flush velocities, resulting in diminished sample disturbance. Water or polymer flush is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis bit is part of the\u003cspan\u003e \u003cstrong\u003eHawk\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cb\u003e 14 Series\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e. The Hawk 14 is forged with the\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003ediamond extremely exposed\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003efrom the bit matrix, meaning this series of Coring Bit is\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003ebuilt for very hard formations\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e, making it more effective for drilling through rocks such as\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eGneiss\u003c\/strong\u003e\u003c\/span\u003e\u003cb\u003e, Granite, Basalt, Gabbro \u003c\/b\u003e\u003cspan\u003eand\u003c\/span\u003e\u003cb\u003e Rhyolite.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHawk range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof coring drill bits are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSet To Liner models\u003c\/strong\u003e, meaning the casing string that does not extend to the top of the wellbore, but instead is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanchored or suspended from inside the bottom of the previous casing string\u003c\/strong\u003e. There is no difference between the casing joints themselves. \u003c\/p\u003e","brand":"China Drill","offers":[{"title":"Default Title","offer_id":45000623325430,"sku":"T286STL014","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/files\/T2-86ImpregCoreBitSeries14FrontWithHawkLogo.jpg?v=1697036705"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0477\/9254\/collections\/T2-86_Collection_Image_Photoshop.jpg?v=1681394821","url":"https:\/\/www.drillit.shop\/tr\/collections\/t2-86-core-barrel.oembed?page=2","provider":"Drill-It","version":"1.0","type":"link"}